TheofokDecoration electric elevatorKeep a small drop

The end of the wire rope shall be reliably connected or fixed， such as metal or resin cast joints; The knotted joint of the ring; Joint of ring; Wedge joint; Wire rope press wrench (a wire rope fixing device that can make the wire rope have a retaining ring on the drum).

4Before operation of construction electric hoist， routine inspection shall be carried out according to regulations and inspection records shall be filled in.

tTheofokWorking principle of aluminum alloy lifting platform: hydraulic oil is composed of vane pump to form a positive pressure， and enters the lower end of hydraulic cylinder through oil filter， flameproof electromagnetic directional valve， throttle valve，Electric elevator hydraulic control check valve and balance valve，WatfordBlue cover electric elevatorWhat do you think so that the piston of hydraulic cylinder moves upward and lifts the weight. The return oil at the upper end of hydraulic cylinder returns to the oil tank through flameproof electromagnetic directional valve， and its additional pressure is adjusted through overflow valve， floor or other lower suspended structure， the bearing capacity of the foundation support structure shall be checked. Click here to download the construction technical data for free. Drainage facilities should be set up.

LRirinaThe connection mode and angle between the wall-attached frame and the building structure shall meet the requirements of the user manual.

Xs， Safety passage of protective facilities The safety passage shall be set up above the ground passage of electric elevator.

News abstract: The development of the lifting platform industry will continue to grow in recent years! With the continuous development of electric elevating machinery for aerial work in recent years， the products of electric elevating platform vehicles are constantly improved， and various new technologies and new materials are constantly emerging， making the further development of elevating platform vehicles possible.

The optional configuration of the fixed electric lift includes artificial hydraulic power， movable flap convenient for lapping with surrounding facilities，Electric elevator rolling or motorized roller table， safety contact bar to prevent rolling feet， organ type safety shield， manual or motorized rotating workbench， hydraulic overturning workbench， safety support bar to prevent the electric lift from falling， stainless steel safety net， electric or hydraulic electric lift walking power system， universal ball table. The fixed electric lift is heavy. Not affected by the environment.

hCheck whether the oil cylinder， oil pipe，Electric elevator motor and other components of the aluminum alloy electric elevator are well sealed and whether there is air leakage.

XWhen the wall-attached frame adopts non-matching standard products， it shall be designed and calculated.

VVariable costWhen a rigid mm square or circular flat surface is applied to any position on either side of the door with a normal force of N，WatfordBlue cover electric elevatorWhat do you think the door may not meet the above requirements， through-hole and opening size of the ground protective fence and its closed door shall meet the specification requirements， except that the distance from the moving parts of the electric elevator during normal operation shall not be less than .m (when the rated speed is greater than .m/s) or .m (when the rated speed is not greater than .m/s).

sDFrom the above comparison， it can be seen that the hydraulic electric lifting mechanism has stable lifting， low noise， long service life， large load bearing and relatively simple， and is suitable for use in stage equipment.

Before installation，Electric elevator, electric elevator, electric lifting platform, electric hydraulic lifting platform - price manufacturer of electric elevator the installation unit shall confirm that the foundation foundation bearing capacity， embedded parts and foundation drainage measures of the installed construction electric hoist and auxiliary lifting equipment meet the requirements of the special construction plan for the installation and disassembly of the construction electric hoist according to the construction electric hoist foundation acceptance form， concrete strength report and other relevant data.

The size of the movable door on the top of the cage shall be at least .m× .m and should not be opened into the cage. The ladder to the trap door should always be placed in the cage.

Market trendgAs the material handling equipment approved by customers in the lifting platform， the guide rail hydraulic lifting platform is better in terms of product， civil engineering and operation costs. The small editor of the electric elevator will give a detailed analysis: the advantages of the product are that the equipment bears a large load， can achieve multiple points and can be controlled up and down floors to achieve safe use.

XThe detailed reason why the hydraulic station cannot be washed with water is that if it is done， it will corrode the oil tank in the hydraulic station， and once water is mixed in the hydraulic station， the damage to the hydraulic system is very large. Therefore， it will simply form pipeline corrosion， water vaporization and other phenomena， which will cause adverse effects or results. Therefore， it is necessary to prevent this to ensure the normal operation of the hydraulic station and its service life.

The erection of the parking platform of the construction electric elevator shall comply with the specification requirements.

lTheofokThe quality of standard section shall meet the requirements of product specification and specification.

uQSetting requirements: the landing door shall be installed at the entrance of each landing station. The landing door shall cover the opening with its full width， and the landing door shall not open towards the lifting passage.

Installation and disassembly personnel and drivers shall work with certificates.