HendersonCustomized electric elevatorWhat are the unknown advantages?

The counterweight steel wire rope should not be too manySetting requirements: the steel wire ropes for suspension shall be no less than two and independent of each other. If the rewinding method is adopted， fill in and submit records as required.

yHendersonIn todays lifting platform market， all kinds of equipment are mixed and no brand image has been established， which also hinders the development of equipment， so establishing a brand image is of great significance to enterprises.

The erection of landing platform and frame body shall be in strict accordance with the relevant provisions of JGJ Technical Code for Safety of Steel Tubular Scaffolding with Couplers in Construction.

TNanningSo why does the lifting platform have such functions and uses， and so many industries need this equipment? Lets share with you the composition of the lifting platform?

QjWhen the horizontal distance between the cage edge and the landing edge or between the cage and the landing door is greater than mm and there is no effective protection of other structures，Electric elevator the landing entrance side protection device shall be equipped.

The lifting platform beam is the foundation of the overall work of the lifting platform. It is a triangular structural frame welded on three high-quality steel，IngolstadtBasement electric elevatorNew trade model of governance solid and reliable to ensure the safety of the whole work.

Setting requirements: The ground protective fence door shall be equipped with a door lock device， which can start or maintain the operation of the cage only when the fence door is in the closed and locked position.

bRequirements for the setting of the operating platform of the construction hoist and the brake reset type emergency stop switch: the stop device (emergency stop switch) shall be able to stop the electric hoist (including the power-driven door) or keep it in a non-working state. The shutdown device (emergency stop switch) shall be set outside the ground protective fence; b) Pulley room (if any. Pulley room refers to the room where only pulleys or speed limiters and electrical equipment are installed; c) cage top， if accessible; d) Installation/disassembly/maintenance/inspection device; e) In the cage.

HThe landing door must be set at the entrance of each landing platform， the landing door must open towards the landing platform side， and the door bolt must be set at the side near the construction electric elevator.

QInspection standardDo not use the end connection device that may damage the wire rope，Electric elevator, electric elevator, electric lifting platform, electric hydraulic lifting platform - price manufacturer of electric elevator such as the U-bolt wire rope clamp.

kMThe counterweight steel wire rope should not be too manySetting requirements: the steel wire ropes for suspension shall be no less than two and independent of each other. If the rewinding method is adopted， the number of wire ropes shall be considered instead of the number of sagging wires. A device for automatically balancing and hanging steel wire rope shall be set. Any spring shall work under compression.

When the landing door is closed cover the opening of the lift passage with full width.

Setting requirements: the installation， maintenance， maintenance， inspection and scrapping of wire rope shall comply with the relevant provisions of GB/T.

Quality improvementiThe fixed electric elevator collects the hook height position signal in real time. When the height exceeds the set height， the left rotation circuit of the rotation mechanism will be automatically cut off and an audible and visual alarm signal will be sent.

MWhen installing，Electric elevator disassembling and adjusting the slewing mechanism， pay attention to ensure that the center line of the slewing mechanism reducer is parallel to the center line of the gear， its meshing surface is not less than %， and the meshing clearance is appropriate.

Every theater is a public place with more people. The stage design should consider more safety issues. According to the relevant national regulations，IngolstadtBasement electric elevatorNew trade model of governance in order to prevent accidents due to the crushing of electric elevators or improper control by drivers. All electric elevators shall be equipped with the following necessary safety devices to make the car of the electric elevator stop rising or falling in time.

qHendersonBrake. Brake limit switch for partial starting and stopping of electric hoist traction machine. Limiting the lift car to the high or low position can not be used for the assembly of operation; For example， the limit switch controls the overtravel switch. When the car travels to the high or low position， the car will rise or fall. In order to prevent the car from crashing to the top or sinking to the bottom， the stage equipment should remove the over-travel switch that can cut off the power supply and cannot be automatically reset，Electric elevator and install it in the machine room， not in the hoistway; A buffer that can absorb the energy of the moving mechanism and reduce the impact shall be installed.

dYThe foundation base or foundation embedded parts shall be completely embedded in the concrete foundation plate.

The construction electric elevator shall perform the acceptance procedure， and the acceptance form shall be signed by the responsible person.