WatfordBlue cover electric elevatorWhat do you think

Secondly， the hydraulic oil of the lifting platform should be replaced every three months. If the frequency of use is not high， it can be replaced once a year. The hydraulic oil must be clean. After changing the hydraulic oil， it must be automatically lifted and lowered for to times， so that the air in the oil cylinder can be drained clean， and enough space can be maintained to ensure that the lifting platform can be lifted and lowered to the rated lifting height.

1Pay attention to cutting off the power supply. Many operators cant wait to maintain the equipment after the operation，Electro-hydraulic lifting platform and forget the risk of live maintenance. Especially now，DanbicaAutomatic electric elevatorMarket supply maintains tight balance V AC power is used in many occasions. Therefore， it is more important to cut off the power supply for maintenance.

rWatfordGuide rail type electric elevator， also known as guide rail type cargo elevator， is different from the previous electric elevator. It is a kind of elevator that generates power through the power system of the pump station， drives the chain rope by the oil cylinder， and makes the table vertically lift along the guide rail to achieve the purpose of lifting goods between floors.

The cost of electric elevators and lifting platforms also depends on the cost of products. Products with different material specifications have different functions， service life and safety performance. When buying electric elevators and lifting platforms， many people only pay attention to the price thus ignoring the safety and durability. Compared with the product manufacturing of electric elevators and lifting platforms， the workmanship is fine and the safety is stronger.

HChivakoaIn order to ensure safe and reliable braking of the lifting platform and prevent accidents，Electro-hydraulic lifting platform hydraulic control check valve， namely hydraulic lock， is added to ensure safe self-locking in case of accidental bursting of the hydraulic pipeline. An overload sound-controlled alarm is installed to distinguish overload or equipment failure. The electrical system passes the explosion-proof button SB— SB comes from the rotation of the motor and the commutation of the flameproof electromagnetic directional valve to keep the load up or down， and passes“ The program adjusts the amount of time delay to avoid frequent starting of the electric elevator and affecting its service life.

FgDrainage measures shall be considered around the foundation. (Drain the accumulated water on the foundation through the drainage ditch).

As the material handling equipment approved by customers in the lifting platform， the guide rail hydraulic lifting platform is better in terms of product， civil engineering and operation costs. The small editor of the electric elevator will give a detailed analysis: the advantages of the product are that the equipment bears a large load， can achieve multiple points， and can be controlled up and down floors to achieve safe use.

The pulley must be installed with the setting requirements of the wire rope anti-falling device: the wire rope anti-falling device on the pulley should meet the following requirements: -- The pulley guiding the wire rope upward should prevent foreign matters from entering; -- Effective measures shall be taken to prevent wire rope from falling out of groove.

fWhen the lowering valve is open and the lowering button is released， use a voltmeter to check whether the lowering valve is energized. If there is no power， check the circuit and eliminate the fault; If there is power，Electro-hydraulic lifting platform solid and reliable to ensure the safety of the whole work.

NIndustry managementSetting requirements: before the installation of construction electric lift， the installation unit shall prepare a special construction plan for the installation and dismantling of construction electric lift，DanbicaAutomatic electric elevatorMarket supply maintains tight balance which shall be approved by the technical director of the installation unit， submitted to the construction general contractor or the user and the supervision unit for review， and notified to the construction administrative department at or above the county level where the project is located.

gKIf the whole strand breaks， the wire rope shall be scrapped immediately.

Thirdly， weekly inspection shall be carried out to check whether the connecting screws at all parts of the lifting platform are tightened， whether the sealing ring is damaged or invalid， whether there is a lack of hydraulic oil， and whether the oil cylinder leaks. The lifting frame，Electric elevator, electric elevator, electric lifting platform, electric hydraulic lifting platform - price manufacturer of electric elevator shear fork， line and oil cylinder must be cleaned once a week to avoid dust and sundries affecting the normal operation.

According to the insiders， the fixed electric elevator can be equipped with auxiliary devices for any combination. For example， the lift car can be used in conjunction with the conveying equipment at the entrance and exit to fully automate the conveying process. The operator does not need to enter the electric elevator， so as to ensure the personal safety of the operator， etc.

Where can I find it?dFrom the point of view of the safety performance of the machinery itself there will be no major safety problems for the machinery that has passed the national safety certification. The main problems are concentrated on the falling off or damage of the mechanical parts due to various factors after the use of the electric hoist for a period of time. This problem depends on the regular inspection and maintenance of the machinery

KSwivel rings and other hardware. The slewing bearing shall be tightened regularly with torque wrench according to the specified quantity to check whether the equipment appearance is damaged.

The wall-attached frame of the construction electric elevator shall be intact and fixed reliably， wall-attached frame spacing and end height must meet the requirements of the Operation Manual. The included angle between the plane of the wall-attached frame and the normal direction of the attached surface shall not be greater than °. When the attachment device does not meet the requirements of the Operation Manual due to its conditions and its attachment distance， its calculation sheet