Solingen1 ton electric elevatorMatters to prevent damage

The function of the lift table in the theater is roughly as follows: the main lift table arranged in the main performance area of the stage is mainly used for rapid change of scenery. Typically，“ Product” In the stage of the song and dance theater arranged in a zigzag pattern， the lifting platform， the side car platform and the rear car turntable work together to quickly transform the whole or part of the scene. This arrangement can allow rapid conversion of three sets of full sets.

0Do not use the end connection device that may damage the wire rope， such as the U-bolt wire rope clamp.

eSolingenThe construction electric hoist shall be equipped with an emergency stop switch and meet the specification requirements.

The size of the landing platform shall be determined according to the technical parameters and installation position of the construction electric elevator.

ERuisatPay attention to the maintenance and protection records of the electro-hydraulic lifting channel. It is excellent to keep records on time， which not only can understand the performance of the equipment in different periods，Electro-hydraulic lifting platform but also is not easy to mix，DelftUsed electric elevatorFailure cause analysis and improvement measures so as to diagnose the problems at different stages.

IzLow power consumption: when the hydraulic guide lifting platform is lowered， it is driven by the pressure generated by its own weight， which greatly saves energy and reduces consumption.

So why does the lifting platform have such functions and uses， and so many industries need this equipment? Lets share with you the composition of the lifting platform?

The straight part of the wire rope with wavy shape， such as the wire rope bypassing the pulley or drum， which does not bend under any load condition， meets d (nominal diameter) gt; d/ (d is the relative envelope diameter after deformation) or the bending part of the wire rope around the pulley or drum meets d gt; d the wire rope shall be scrapped.

gGood stability: overflow valve can prevent the system pressure from being too high when moving upward. Emergency manual valve: in case of power failure， the car can be lowered to the nearest floor to open the door. Manual pump: in case of system failure， the manual pump can be operated to pump high-pressure oil to lift the car to the nearest floor; Oil temperature protection of the oil tank: when the oil temperature in the oil tank exceeds the standard setting value，Electro-hydraulic lifting platform the oil temperature protection device will signal to suspend the use of the elevator， and the elevator can be started only after the oil temperature drops.

YChain-type electric lifting mechanism: with good guiding mechanism， it can ensure that the equipment does not tilt during operation. Gear and rack electric lifting mechanism: accurate transmission and high cost.

IDirect materialIf the whole strand breaks， the wire rope shall be scrapped immediately.

iSAs the material handling equipment approved by customers in the lifting platform， the guide rail hydraulic lifting platform is better in terms of product， civil engineering and operation costs. The small editor of the electric elevator will give a detailed analysis: the advantages of the product are that the equipment bears a large load， can achieve multiple points and can be controlled up and down floors to achieve safe use.

， Safety passage of protective facilities The safety passage shall be set up above the ground passage of electric elevator.

The construction electric hoist shall be equipped with lightning protection device when it is outside the scope of lightning protection.

Packaging strategyrThe oil cylinder and seal adopt imported parts to solve the problem of low oil pressureStable， oil leakage of parts.

FThe cage door shall be equipped with electrical safety device (switch). When all cage doors are closed， the cage can be started or kept in operation.

For customers to use and operate the lifting platform for a long time，Electro-hydraulic lifting platform Xiao Bian briefly introduces how to carry out the maintenance and repair of the lifting platform: First of all， the maintenance of normal rules is mainly based on prevention，DelftUsed electric elevatorFailure cause analysis and improvement measures especially if it is found in time before damage or failure， it should be corrected or repaired. Careful inspection and maintenance at this time can save costs and avoid larger problems， resulting in costly renovation.

hSolingenSetting requirements: the landing door shall be stereotyped and tooled.

tVThe lifting platform shall be able to carry people and goods under the reliable and effective conditions of overvoltage， undervoltage and phase staggering protection devices. At first the fixed electric elevator stopped on the ground. At this time， physicists observed that all objects in the lifting platform were subjected to a downward acceleration， which is the characteristic of the earths gravitational field. Then， move the lifting platform to the space far away from the earth without gravity field. Assume that the lift table is stationary. Or moving at a uniform speed， which makes the range of aerial work larger and suitable for multiple people to work at the same time. The lifting power is divided into V，Electric elevator, electric elevator, electric lifting platform, electric hydraulic lifting platform - price manufacturer of electric elevator V or V power supply， diesel engine， using Italian and domestic hydraulic pump station， and the table top is equipped with anti-slip insulation gusset plate， which has anti-slip