ParksElectric folding elevatorCharacteristics of shielding effect

Setting requirements: the ground protective fence of the construction electric elevator shall be enclosed in a circle， and the height shall not be less than m. In its locked position， when a rigid mm square or circular flat surface is used to apply a N normal force to any position on either side of the door the door shall: - be able to bear without deformation; - Deformation is not more than mm; - Normal operation after test.

4Setting requirements: the landing door shall be installed at the entrance of each landing station. The landing door shall cover the opening with its full width， and the landing door shall not open towards the lifting passage.

sParksEach boxClean the dust on the electrical equipment.

The counterweight steel wire rope should not be too manySetting requirements: the steel wire ropes for suspension shall be no less than two and independent of each other. If the rewinding method is adopted， the number of wire ropes shall be considered instead of the number of sagging wires. A device for automatically balancing and hanging steel wire rope shall be set. Any spring shall work under compression.

VGambiaA complete lifting platform accessory can be selected and customized according to different places， sites and environments. Meet the needs of different users. So why the lifting platform can be used and installed in so many industries and places is because it can achieve multi-purpose，Electric elevator display multi-function，not badElectric elevators for construction sitesCompany production meet a variety of different needs， and win the market demand. The lifting platform has begun to play an increasingly important role in the modern industrial transportation process， whether in airports， docks， warehouses， floors， workshops and other places that need fast loading and unloading of goods， it plays a very practical value， It has also made great contributions to the entire industry and even the entire economic development. However，Electric elevator the long-term operation and use of these equipment will inevitably lead to wear and consumption， and regular maintenance and service is indispensable. Otherwise， the work efficiency and utilization rate will decline. At that time， the gains will outweigh the losses.

ZkThe use of connecting bolts in the standard section shall comply with the operation instructions and specifications.

The erection of the parking platform of the construction electric elevator shall comply with the specification requirements.

Civil engineering advantages The pit depth of the guideway lifting platform is generally about -mm， which can cut off the power supply before the cage contacts with other mechanical stop devices (such as buffers)， wide working platform and high bearing capacity， which makes the range of aerial work larger and suitable for multiple people to work at the same time. The lifting power is divided into V， V or V power supply， diesel engine， using Italian and domestic hydraulic pump station，Electric elevator and the table top is equipped with anti-slip insulation gusset plate， which has anti-slip，not badElectric elevators for construction sitesCompany production insulation and safety. Please rest assured to use.

Brake. Brake limit switch for partial starting and stopping of electric hoist traction machine. Limiting the lift car to the high or low position can not be used for the assembly of operation; For example， the limit switch controls the overtravel switch. When the car travels to the high or low position， the car will rise or fall. In order to prevent the car from crashing to the top or sinking to the bottom， the stage equipment should remove the over-travel switch that can cut off the power supply and cannot be automatically reset， and install it in the machine room， not in the hoistway; A buffer that can absorb the energy of the moving mechanism and reduce the impact shall be installed.

When the landing door is closed， cover the opening of the lift passage with full width.

supplysSetting requirements: the protective shed at the ground feed inlet shall be set above the feed inlet， the width must be greater than the width of the passage opening，Electric elevator, electric elevator, electric lifting platform, electric hydraulic lifting platform - price manufacturer of electric elevator it is necessary to check whether the accompanying technical data are complete and the width should be greater than the width of the cage.

IAfter the purchase of mobile electric elevator， whether the accompanying accessories， tools and accessories are consistent with the list， whether the equipment and accessories are damaged or defective， and make unpacking acceptance records.

The use of connecting bolts in the standard section shall comply with the operation instructions and specifications.

xParks， Safety passage of protective facilities The safety passage shall be set up above the ground passage of electric elevator.

bOIf an emergency exit door is set on the cage wall， its size shall be at least .m× m， which shall be opened or sliding in the cage， or provide other safe access to the guide rail frame or building structure.

The wall-attached frame of the construction electric elevator shall be intact and fixed reliably， and its attachment distance， wall-attached frame spacing and end height must meet the requirements of the Operation Manual. The included angle between the plane of the wall-attached frame and the normal direction of the attached surface shall not be greater than °. When the attachment device does not meet the requirements of the Operation Manual due to its conditions， its calculation sheet， design and manufacturing materials shall be confirmed by the manufacturer or reviewed by the technical director of the installation unit and demonstrated by experts.